Montreal Sealcoating

Asphalt sealcoating in Montreal

Sealcoating puts a thin protective layer over asphalt. It keeps out water, road salt, oil and sun, and brings back a deep black colour. We sealcoat any asphalt surface, from a single driveway to a full parking lot.
  • Registered Quebec business (NEQ)
  • Fully insured
  • 5 years in business
Worker spreading asphalt sealer across a driveway with a squeegee

Get your quote

We only use your details to reply to your request. Privacy policy

What asphalt sealcoating protects against

Asphalt is tough, but it wears out from the top down. A coat of sealer takes the hit instead.

  • Water

    Water that soaks in freezes and expands in winter, opening cracks and loosening stones.

  • Road salt

    De-icing salt dries out the binder that holds asphalt together, so the surface crumbles sooner.

  • Oil and gas

    Drips from cars soften asphalt and leave stains that keep spreading.

  • Sun

    UV turns black asphalt grey and brittle. Brittle asphalt cracks faster.

Surfaces we sealcoat

  • DrivewaysHomes across Montreal and nearby.
  • Parking lotsBusinesses, condos and multi-unit buildings.
  • Private roads and lanesShared lanes, access roads and long rural driveways.
  • Paths and walkwaysAsphalt paths around homes, buildings and parks.

Choosing an asphalt sealer

Most sealers fall into two families. Refined coal tar sealers stand up well to oil and gas spills. Asphalt emulsion sealers have less odour and fewer harsh chemicals. Both protect the surface when they're applied properly on clean, dry asphalt.

The right asphalt sealer depends on the surface and how it's used. We'll tell you what we recommend for your job and why.

How asphalt sealcoating is applied

  1. 1

    Clean

    We sweep and blow the surface clean, trim the edges and treat oil spots so the sealer bonds.

  2. 2

    Repair

    Cracks get sealed and damaged spots get patched. Sealer protects asphalt. It doesn't fix it.

  3. 3

    Apply

    The sealer goes on in thin, even coats, by squeegee or spray depending on the surface.

  4. 4

    Cure

    Keep cars off for 72 hours (3 days). We'll tell you exactly when it's ready.

When to sealcoat

Sealer needs warm, dry weather to cure: around 10°C and rising, with no rain for at least a day. In Montreal that means late spring to early fall.

Most asphalt needs a fresh coat every two to three years. If the surface looks grey and water soaks in instead of beading up, it's time. The price depends on the size of the area and how much repair it needs. See typical driveway sealcoating prices, or request a quote.

Asphalt sealcoating questions

Is sealcoating the same as paving?

No. Sealcoating is a thin protective coat over asphalt that is already in decent shape. It does not fix sunken areas or a failing base. For that, see asphalt repair or parking lot paving.

Can new asphalt be sealcoated right away?

No. New asphalt needs time to cure first. Most new asphalt should wait at least six months before its first coat.

How long does asphalt sealcoating last?

Usually two to three years. Driveways with light traffic can go a bit longer. Busy parking lots and areas that get a lot of salt may need it sooner.

Is fresh sealer slippery?

A new coat is smoother than old, worn asphalt. Many sealers have fine sand mixed in to keep some grip. Ask us about it when we quote your job.

Protect your asphalt this season